Lightning LB 2.5-inch

Server systems embraced the 2.5-inch drive form factor for high performance, lower power and more configuration density (drives per shelf).  A single Lighting LB will replace many hard disk drives and still deliver the same or greater I/O performance with simultaneous multiple read/write transactions and transferring data via both (dual) ports.

The Lightning LB Enterprise Flash Drive is designed to the industry standard 2.5-inch drive form factor and has a Serial Attached SCSI (SAS) interface. Pliant expanded its Lightning LB  product line with two new MLC (multi-level cell) NAND flash storage devices; the Pliant Lightning LB 200M and Lightning LB 400M enterprise flash drives. The LB drive does not require changes to the existing software or hardware infrastructure. This makes integration into existing storage solutions, as well as enabling new optimized solutions seamless and simple for IT managers.

Product Specifications
Interface, Capacity,
and Memory Technology
LB 150S
Host Interface SAS
Interface Ports 2 (full duplex)
User Capacities 150GB
Sector Sizes Supported 512, 520, or 528 bytes per sector
Flash Memory Technology SLC NAND
Performance (Typical) LB 150S
Data Throughput Read > 420 MB/sec
Write > 220 MB/sec
Total IOPS  >120K IOPS
Physical Dimensions LB 150S
Height (max) 15.0 mm
Width (max) 69.85 mm
Length (max) 100.45 mm
Weight 0.2 Kg
Power Consuption LB 150S
Idle 3.9 watts
Typical 5.9 watts
Reliability LB 150S
No Write Cache No risk of data loss
Read Endurance Unlimited
Write Endurance (petabytes) Unlimited
Unrecovered Error Rate (UBER) <1 sector in 1 E10-17 bits read
End-to-End Data Protection Yes, including T10
DIF (SCSI PI) support
Patrol Read (automatic) No performance impact
Power-on Hours 8760 hours per year
MTBF 2 million hours
Environment LB 150S
Operating Temperature (ambient) 0 to 60° C
Non-operating Temperature -40 to 85° C
Start-up time (Power On to Ready)  <15 seconds
Lightning LB
LB